Special Offer

Kingston DDR3 RAM 2GB PC1333

 
Rs.2750
SKU001218
Out-of-stock

This document describes Value RAM's 256M x 64-bit 2GB (2048MB) DDR3-1333 CL9 SDRAM (Synchronous DRAM) Memory Module based on sixteen 128M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC Standard latency 1333Mhz timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers and requires +1.5V.

Features

  • JEDEC standard 1.5V ? 0.075V Power Supply
  • VDDQ = 1.5V ? 0.075V
  • 667MHz fCK for 1333Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 5,6,7,8,9,10
  • Posted CAS
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • Programmable CAS Write Latency(CWL) = 9(DDR3-1333)
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address ?000? only), 4 with tCCD = 4
  • which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ? 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower then TCASE 85?C, 3.9us at 85?C < TCASE . 95?C
  • Asynchronous Reset
  • 1066Mbps CL7 doesn?t have backward compatibility with 800Mbps CL5
  • PCB : Height 1.180? (30.00mm), double sided component



Performance

  • CL(IDD) 9 cycles
  • Row Cycle Time (tRCmin) 49.5ns (min.)
  • Refresh to Active/Refresh Command Time (tRFCmin) 90ns
  • Row Active Time (tRASmin) 36ns (min.)
  • Power TBD W (operating)
  • UL Rating 94 V - 0
  • Operating Temperature 0o C to 85o C
  • Storage Temperature -55o C to +100o C



Warranty : Lifetime Limited Warranty

Manufacturer:
Kingston

No posts found

Write a review